To and from your personal computer
You will need software that supports secure transfer of files between your computer and the Compute Canada machines. The commands
sftp can be used in a command-line environment on Linux or Mac OS X computers. On Microsoft Windows platforms, MobaXterm offers both a graphical file transfer function and a command-line interface via SSH, while WinSCP is another free program that supports file transfer. PuTTY comes with
psftp which are essentially the same as the Linux and Mac command line programs.
If it takes more than one minute to move your files to or from Compute Canada servers, we recommend you install and try Globus Personal Connect. Globus transfers can be set up and will go on in the background without you.
Between Compute Canada resources
Globus is the preferred tool for transferring data between Compute Canada systems, and if it can be used, it should.
However, other common tools can also be found for transferring data both inside and outside of Compute Canada, including
From the World Wide Web
To synchronize or "sync" files (or directories) stored in two different locations means to ensure that the two copies are the same. Here are several different ways to do this.
GlobusGlobus is a file transfer service [https://www.globus.org/] Transfer
We find GlobusGlobus is a file transfer service [https://www.globus.org/] usually gives the best performance and reliability.
Normally when a GlobusGlobus is a file transfer service [https://www.globus.org/] transfer is initiated it will overwrite the files on the destination with the files from the source, which means all of the files on the source will be transferred. If some of the files may already exist on the destination and need not be transferred if they match, you should go to the bottom of the transfer window as shown in the screenshot and choose to "sync" instead.
You may choose how GlobusGlobus is a file transfer service [https://www.globus.org/] decides which files to transfer:
|Their checksums are different||This is the slowest option but most accurate. This will catch changes or errors that result in the same size of file, but with different contents.|
|File doesn't exist on destination||This will only transfer files that have been created since the last sync. Useful if you are incrementally creating files.|
|File size is different||A quick test. If the file size has changed then its contents must have changed, and it will be re-transferred.|
|Modification time is newer||This will check the file's recorded modification time and only transfer the file if it is newer on the source than the destination. If you want to depend on this it is important to check the "preserve source file modification times" option when initiating a GlobusGlobus is a file transfer service [https://www.globus.org/] Transfer.|
For more information about GlobusGlobus is a file transfer service [https://www.globus.org/] please see Globus.
Rsync is a popular tool for ensuring that two separate datasets are the same but can be quite slow if there are a lot of files or there is a lot of latency between the two sites, i.e. they are geographically apart or on different networks. Running rsync will check the modification time and size of each file, and will only transfer the file if one or the other does not match. If you expect modification times not to match on the two systems you can use the "-c" option, which will compute checksums at the source and destination, and transfer only if the checksums do not match.
Some users have encountered trouble when using
rsync to transfer directories into
-g flags (or equivalently
--group) may cause the group ownership of files to be incorrectly set. Since quotas in
/project are enforced based on group ownership this in turn may lead to
Disk quota exceeded. The frequently-used
--archive flag implies
-g. Best advice is to use GlobusGlobus is a file transfer service [https://www.globus.org/] instead of rsync, but if you choose to use rsync, do not use
Using checksums to check if files match
If GlobusGlobus is a file transfer service [https://www.globus.org/] is unavailable between the two systems being synchronized and Rsync is taking too long, then you can use a checksum utility on both systems to determine if the files match. In this example we use
[name@server ~]$ find /home/username/ -type f -print0 | xargs -0 sha1sum | tee checksum-result.log
This command will create a new file called checksum-result.log in the current directory; the file will contain all of the checksums for the files in /home/username/. It will also print out all of the checksums to the screen as it goes. If you have a lot of files or very large files you may want to run this command in the background, in a screen or tmux session; anything that allows it to continue if your SSH connection times out.
After you run it on both systems you can use the
diff utility to find files that don't match.
[name@server ~]$ diff checksum-result-silo.log checksum-dtn.log 69c69 < 017f14f6a1a194a5f791836d93d14beead0a5115 /home/username/file-0025048576-0000008 --- > 8836913c2cc2272c017d0455f70cf0d698daadb3 /home/username/file-0025048576-0000008
It is possible that the
find command will crawl through the directories in a different order resulting in a lot of false differences so you may need to run
sort on both files before running diff such as:
[name@server ~]$ sort -k2 checksum-result-silo.log -o checksum-result-silo.log [name@server ~]$ sort -k2 checksum-dtn.log -o checksum-dtn.log
SFTP (Secure File Transfer Protocol) uses the SSH protocol to transfer files between machines which encrypts data being transferred.
For example you can connect to a remote machine at
ADDRESS as user
USERNAME with SFTP to transfer files like so:
[name@server]$ sftp USERNAME@ADDRESS The authenticity of host 'ADDRESS (###.###.###.##)' can't be established. RSA key fingerprint is ##:##:##:##:##:##:##:##:##:##:##:##:##:##:##:##. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'ADDRESS,###.###.###.##' (RSA) to the list of known hosts. USERNAME@ADDRESS's password: Connected to ADDRESS. sftp>
or using an SSH Key for authentication using the
[name@server]$ sftp -i /home/name/.ssh/id_rsa USERNAME@ADDRESS Connected to ADDRESS. sftp>
which returns the
sftp> prompt where commands to transfer files can be issued. To get a list of commands available to use at the sftp prompt enter the
SCP supports an option,
-r, to recursively transfer a set of directories and files. We recommend against using
scp -r to transfer data into
/project because the setgid bit is turned off in the created directories, which may lead to
Disk quota exceeded or similar errors if files are later created there.